DNA WXLR1 wireless audio transmission system UHF transmitter receiver USB-C +48V Phantom 2x XLR/jack 6.35 mm adapter set

⭐ Ideal wireless system for sound engineers, professional and beginner musicians

Discover DNA WXLR1 - a UHF wireless audio transmission system, which is an essential tool for every beginner, professional musician and sound engineer. ✅ With an XLR transmitter and receiver with built-in rechargeable batteries powered by a USB-C port and +48V Phantom power (enabled by an intuitive 48V/5V switch), you can enjoy the highest-quality sound without unnecessary cabling. ✨ The system offers wide frequency response, 24-bit resolution, 48 kHz sampling rate and signal-to-noise ratio of less than 110 dB, which guarantees clear and crisp sound. ⚡ Two XLR/jack 6.35mm adapters are included so you can connect the transmitter and receiver to instruments and various audio devices, making it extremely multi-purpose. ✔️

Included:

• transmitter,
• receiver,
• XLR male - jack 6.35 mm adapter,
• XLR female - jack 6.35 mm adapter,
• 2x USB-C - USB-A power cord,
• user manual (PL/EN).

⭐ Reliable technology for recording studios

DNA WXLR1 is a real treasure in any recording studio, where reliability and quality are key. ✅ With ± 3 ppm frequency stability and DQPSK modulation method, you can rely on a clean and stable signal. ✨ With a latency of less than 5 ms, you gain confidence that the sound will reach the recipient in real time. ⚡ In addition, the system offers 16 channels with an interval from 0.5 to 2.5 MHz, which increases efficiency and flexibility of operation. ✔️

⭐ Practical solution for live performances and conferences

Are you conducting conferences or performing live on stage? DNA WXLR1 is the perfect solution for you! ✅ With a maximum operation range of up to 80 meters (open space), you can move freely around the stage or conference room. ✨ Powered by rechargeable lithium batteries each with a capacity of 1000 mAh, it allows continuous operation for about 6-8 hours. ⚡ Intelligent noise reduction, MIC/LINE switch and automatic startup when connected ensure hassle-free operation. ✔️

⭐ Portability and convenience for every user

DNA WXLR1 is a compact device, which you can take anywhere. ✅ Weighing only 0.5 kg, the set is extremely easy to carry. ✨ With XLR connectors (male/female), you can easily integrate DNA WXLR1 set into your existing sound systems. ⚡ Easy-to-read transmitter and receiver displays as well as power level indicators for each rechargeable battery make operation intuitive and convenient. ✔️ Invest in DNA WXLR1 and enjoy unparalleled sound quality in any situation❗

Technical specification:

• Power type and voltage: DC 5V
• Fuse: 1A
• Rechargeable battery: lithium, 3.7V , 1000 mAh
• Power input: USB-C
• Power cord: USB-A - 2x USB-C
• Device type: wireless audio transmission system
• Modulation method: DQPSK
• Frequency range: 530-589 MHz UHF
• Frequency stability: ± 3 ppm
• Channels: 16
• Channel interval: 0.5-2.5 MHz
• Signal-to-noise ratio: <110 dB
• Latency: <5 ms
• Audio bit depth: 24 bits
• Sampling frequency: 48 kHz
• Frequency response: 40-20000 Hz
• Working operation range: approx. 30 m
• Max operation range: approx. 50-80 m (open space)
• Max operation time: approx. 6-8 hrs
• Mic/Line switch: yes
• 48V/5V switch: yes
• +48V Phantom power: yes
• Connectors: XLR male/female
• XLR/jack 6.35 mm adapters: 2
• Rechargeable battery level indicator: yes
• Intelligent noise reduction: yes
• Automatic start-up when connected: yes
• Transmitter/receiver dimensions: 11 x 3.5 x 2.8 cm
• Set net weight: 0.5 kg
• Set gross weight: 0.7 kg

Original packaging and filling.